FEV North America Automotive Testing Expo 2016 exhibit to include test systems of new partner TrigTec
FEV shows synergies from new partnership, plus full range of its own testing systems division software and hardware products
Auburn Hills, Mich., Oct. 25, 2016 – FEV North America, Inc., an FEV Group company, announced today that it will unveil its new relationship with TrigTec, which it acquired in September 2016, along with its own industry-leading testing technology and systems, at Automotive Testing Expo 2016. One of the largest testing technology shows and symposiums, the event takes place at the Suburban Collection Showplace in Novi, Mich. on Tuesday, Oct. 25 – Thursday, Oct. 27, 2016.
The TrigTec acquisition presents an opportunity for FEV to extend its testing capabilities from simulation and test beds downstream into the production process, thereby expanding its ability to serve customers. TrigTec technologies that will be exhibited include mobile semi-automatic leak test carts that are designed to support test development, manual or low-volume production lines and repair areas.
At the Testing Expo, FEV will also show a variety of technologies for the industry:
Road to Rig – FEV Powertrain Test Bed demo
The demo illustrates FEV tools and services that bring customer projects to completion in the most efficient, cost effective, and advanced way.
xMOD
- xMOD is a multi-model co-simulation and virtual experimentation tool that is an essential element in FEV’s Road to Rig offer.
- xMOD progresses seamlessly from MiL to HiL, and then to the test bed, providing an easy, cost-effective and flexible path to development completion.
TOMx
- TOMx is a next-generation test bench controller for component and system test benches that provides powerful, robust IPC with i7 and I/O boards.
- It is adaptable to engine, transmission and driveline test cells.
- Advanced control techniques and integrated simulations capabilities, along with secure operation of test objects makes TOMx the best choice for controller / component systems, providing an excellent cost / performance ratio.
MORPHEE Model Based Calibration (MMBC)/ ICE2
- MMBC ensures safe and successful collection of a data set while integrating powerful on line algorithms able to shorten calibration workflow and achieve a successful result. ICE2 then provides a complete office platform that integrates all centralized data and provides best-case optimization of the engine in combination with the after treatment system.
MORPHEE 64 bit
- This full 64-bit version is Windows 10 ready and maintains compatibility with 32-bit MORPHEE applications. It is a unique platform that combines automation of testing, online calibration operations and real-time simulation at the test bed.
AirRate
- AirRate is a robust method for accurate combustion air measurement.
- Using titanium ultrasonic transducers, AirRate provides high measuring accuracy due to direct, four-path layout without reflection of signals.
- It is suitable for a large range of engines, with a wide measuring range of up to 1:140.
BlowByRate
- BlowByRate is a state-of-the-art measuring system for blow-by gasses.
- Its high accuracy flow metering extends over the whole measuring range, with bi-directional measurement possible without accuracy losses.
- Continuous measurement is possible, and frequent short term zeroing is not required.
- BlowByRate is suitable for a large range of different engines, and is modular for easy adaptation to different measuring demands with easy, tool-less orifice changes.
FEVFlex
- FEVFlex is a system supporting the complete information process in the development of new products, from planning and job creation through documentation of all activities, data management, and analysis reporting.
FEVFlex offers two editions, the Test Field Management 4.0 edition and the Benchmarking edition. The Test Field Management edition provides a view of the entire test field, including data management, part tracking, etc., while the Benchmarking edition provides a quick ’one click’ comparison and analysis of all types of data.
FEVALYS
- FEVALYS is a Windows-based tool for analysis and visualization of a variety of data generated during engine and vehicle development. It integrates data browsing, calculation and report generation, closing the gap between data acquisition and the presentation of test results, and can aggregate data from steady state or dynamic measurement, either manually or automatically. It saves customers time and money.
Tectos Driveline
- FEV offers Tectos products exclusively in the U.S. for its customers. Tectos offers tShaft, a software analysis tool that receives technical input from a customer’s test rig, allowing the selection of appropriate driveline products.
Tectos driveline components are designed by experts in the development of high-speed applications and are unique in that they contain an internal bearing that offers a very rigid system with respect to bending, and also offers a compliant torsional coupling for damping / low speed operation.
关于FEV
FEV不断挑战极限。
FEV是国际公认的跨领域和行业的创新领导者。Franz Pischinger教授将他在学术界和工程的背景与不断进步的伟大愿景相结合,奠定了基础。公司为全球最大的汽车OEM提供解决方案和战略咨询,并在整个交通和出行生态系统中为客户提供支持。
随着世界的不断发展,FEV也在不断发展。
这就是FEV将其技术和战略专业知识投入到其他领域的原因。将前瞻性思维应用于能源领域。软件和系统技术将使公司能够引领潮流,为每个人提供智能解决方案。FEV汇集了来自不同背景和专业最聪明的人,为当前和未来的挑战寻找新的解决方案。
但FEV不会止步于此。
展望未来,FEV将继续挑战极限,推动创新。FEV 在全球 40 多个地点拥有 >###EMPLOYEES## 名高素质员工,设计的解决方案不仅能满足当今的需求,还能满足未来的需求。最终,FEV不断发展,以可持续出行、能源和驱动一切的软件为基础,为合作伙伴,为员工和世界,打造一个更美好,更清洁的未来。
#FeelEVolution
#感受发展,引领未来
- Files:
FEV_Test_Expo_2016_Press_Release_102516.doc51 KB
Press inquiries to: presse@fev.com

